Sensor Interchangeable Amplifier Imada eZT
Sensor-Interchangeable-Amplifier-Imada-eZT

Feature:

High Speed Sampling Rate
The 2000Hz high speed sampling rate captures accurate force values of testing.
High Visible Display & Lamps
The display is adopting OEL. It enables to show force values, unit and others very clearly.
The display has 3 separated rows. They show Force and the necessary information at the same time
such as date, time, high/low setting points and No. of stored data.
The LED lamps above the amplifier help easy checking whether the displayed force is between setting points.
Useful Functions
It equips a lot of useful functions for force measurement.
Peak hold function, Data sending function (up to 1000 points to the internal memory),
Pass/Fail decision and more. High-operability force measurements are possible.
Data Output
Many types of output signals are available such as USB, analog , RS232C, displacement I/O, USB flash drive and more.
Using including software ZT logger, it is able to output the data stored in the internal memory to a PC.
Continuous test data output  is also possible at 10 data/ sec.
Using optional software Force Recorder (Light / Standard), draw a force- time graph at 2000 data/sec on PC.
Using another optional software Force Recorder (Professional) and
connecting a force test stand with a linear scale or a built-in linear scale DMK series,
force-displacement measurement is possible.  It is ideal for detailed analyses.
[Note]
1. Overall accuracy is calculated as the total of the accuracy of amplifier (+/- 0.2%F.S.) and
load cell (see each specification sheet).
2. Please calibrate before using eZ-Connect series. The amplifier is not calibrated with any load cell.
Please request calibration for each combination and calibration report if required (available at a charge).
Other Amplifier which might be more suitable for your needs:
Separate Sensor Model Digital Force Gauge ZT series:
For more accurate testing at a difficult place for reaching or mounting a regular-type force gauge.
Desktop Force Amplifier FA Plus2:
Desktop type amplifier.
If you need further information, please click each model name to go to the product web page

Specification: 
 

Model	eZT
Accuracy	+/-0.2%F.S. (*1)
Unit of measurement	Depends on load cell and settings (N, kN, kgf, lbf N-m, N-cm, kgf-m, kgf-cm, lbf-in, ozf-in)
Display	4-digit
Display update	16 / sec
Sampling rate	2000 data / sec at maximum (*2)
Battery	8 hours (2 hours charge) (*3)
Operating environment	Temperature: 0 to +40 degree Celsius, Humidity: 20 to 80%RH
Functions	Customized display (header and footer), Peak hold (tension and compression), Internal 1000 points data memory, Comparator (judgment of OK or NG), Reversible display, Sign inversion, Zero clear timer, +NG alarm, Off timer (auto power off), Dumping,Time display, 1st/2nd peak,Displacement detection at force peak value,Displacement zero reset at selected force, setting lock
Output	USB, RS232C, Mitutoyo digimatic (*4), +/-2VDC analog output (D/A),Comparator 3 steps (-NG/OK/+NG), Overload alarm, Sub comparator 2 steps (output of large or small judgment), USB flash drive, Displacement.
Overload warning	Approx.110%F.S. (Warning message and alarm )
External connecting switch	SEND (a point of contact holding), Zero reset, Peak ON/OFF setting
Available liner scales (*5)	– Online driver output (a line receiver according to RS422/485 must be built in.)
	– Open collector output (Voltage drop between contacts must be smaller than 0.5V.)
Weight	Approx. 490g
Dimensions	Please refer to dimensions.
Accessories	AC adapter, CD driver (including simple software for data logging), USB cable, Carrying case, Adaptor for USB flash drive (*6)

 
*1 These are the specifications for International model.
Please note that this unit is different from Japanese domestic model and international one.
*2 The accuracy of load cell is added when using connected with a load cell.
*3 Up to 100 data/sec. is saved in USB memory (selectable among 1, 50, and 100 /sec)
*4 The battery is more consumed when connected to USB flash drive or a linear scale.
*5 Not always available for Mitutoyo digimatic products.
*6 Some linear scales could not be available even if they meet the mentioned specifications.
*7 USB flash drive is not included.
 
Dimensions: