Desktop Amplifier Imada FA Plus 2

Feature:

-Ideal for integration into facilities due to the box-shaped design
-Easy to combine with external devices such as PLC using the equipped output functions
-High sampling rate (2000Hz) for accurate results by following rapid changes of force
-High RS232C data output speed (continuous data rate: 100 data/sec)
-Option of industrial power supply DC+24V is available

Specifications:

Model	FA Plus2	eFA Plus2
Features	Adjustment is required when change the load cell	Load cell interchangeable eZ Connect series (no need for adjustment)
Accuracy	The accuracy of connected load cell	The accuracy of connected load cell ＋ ±0.2% F.S. (*1)
Unit of measurement	Depends on load cell and settings (N, kN, kgf, lbf, N-m, N-cm, kgf-m, kgf-cm, lbf-in, ozf-in)（*2）
Display	4-digit
Display update	16 / sec
Sampling rate	2000 data / sec at maximum (*3)
Battery	AC adapter（AC100～240V）(*4)
Operating environment	Temperature: 0～40 degree Celsius　 Humidity: 20～80%RH
Functions	Customized display (header and footer), Peak hold (tension and compression), Comparator (judgment of OK or NG), Display of AD value, Reversible display, Zero clear timer, +NG alarm, Off timer (auto power off), Dumping, Time display, 1st/2nd peak, Displacement detection at force peak value, Displacement zero reset at selected force, setting lock
Output	RS232C (baud rate available from 57600bps to 9600bps), USB, 2 VDC analog output (D/A), Comparator 3 steps (-NG/OK/+NG), Overload alarm, Sub comparator 2 steps (output of large or small judgment), USB flash drive, Displacement.
Overload warning	Approx.110%F.S. (Warning message and alarm)
Available liner scales	Online driver output (a line receiver according to RS422/485 must be built in.) Open collector output (Voltage drop between contacts must be smaller than 0.5V.)
Weight	1100g
Dimensions	Refer to dimensions
Accessories	AC adapter (only for standard model), Force Logger (software for data logging) (*5), USB cable, Adapter for USB flash drive (*6), Instruction manual
	Inspection certification	– (*7)

*1 Accuracy ±0.2% F.S. is added.
*2 The available units are different from Japanese domestic model and international one.
*3 When you save data in USB memory stick, the sampling rate is selectable among 1, 50 and 100/sec.
*4 Option of industrial power DC+24V is available. (option: -DC)
*5 Refer to the details on page 2.
*6 USB flash drive is not included.
*7 We offer calibration certification for eFA Plus2 connected with the load cell at extra charge. Please contact us for details.

Main Options:
 

Option	Model	Description	Product model
Industrial Power Supply (*1)	-DC	Industrial power supply: DC+24V, 500mA  Enables to use in industrial power environment. (*1)	FA Plus2 eFA Plus2
Analog Volt	-AN	It outputs sensor data through analog voltage without conversion. (*2) Analog Cable CB-118 is required. (*3)	FA Plus2
High Accuracy (*4)	-HP□□	The accuracy is higher than standard type. Please input the accuracy of the load cell to ☐☐ which you require. Please contact us for details.	FA Plus2

*Model with option follows the rules: FAP2-[load cell model]-[option model].
Example 1: FAP2-DPU-50N -DC -AN Example 2: eFA Plus2-DC Example 3: Accuracy of 0.2% is required FAP2–DPU-50N -HP0.2
*1 AC adapter is not included.
*2 The speed is higher than the standard type. But zero reset is not possible, and it gets many noises
*3 Cables are required when connected to multiple devices.
*4 Some load cells are not available for it. Please contact us for details.

Dimensions (Unit:mm)